Apron Feeders
围裙喂料机是一种坚固的风格的喂料机，可用于喂料或提取材料在各种各样的应用. 围裙给料器擅长处理超出其他给料器范围的物料.
Applications
胶圈给料机通常用作主要或仓给料机应用设计为不同的应用, from light-duty to severe-duty, from low tonnage to high tonnage of material. They are the feeder of choice for reliability, high uptime and high returns on capital, and are designed for decades of service. 与变速驱动器相结合，这些给料器提供了最终的流量控制.
将围裙给料机驱动到破碎机上，确保破碎机在其最高效率下执行, 同时，将胶圈给料器集成到任何下游系统中，确保了最高的运行性能.
胶圈给料机用于在各种各样的物料处理应用中给料, from mining ores, aggregates, scrap/recycle material or any special material you have. They can handle small and large capacities from 10-6,000 tph and can withstand extreme impact loading. 胶圈给料机以均匀的速度输送物料，使下游设备得到最佳的喂料. 由于其使用寿命长，维护费用低, Apron Feeders are a popular feeder choice.
How Apron Feeders Work
胶圈给料机的工作原理是将物料以受控的速度从料斗输送到给料点.
The Apron Feeder consists of a frame, undercarriage components, head shaft, tail shaft, flights and a drive. 起落架链条环绕着头轴和尾惰轮, and flights are bolted to the strands of chain. 链条和飞行组合骑在起落架滚轮上.
围板给料器通常安装在料斗出料端的开口下方. As the head shaft rotates, 料斗里的物料通过飞片的运动被拉出开口. 开口的大小与飞行的速度相结合，提供了一个计量的流量.
胶圈给料机是量身定制的，以适应多种应用和安装要求. This means that various aspects of the material stream, such as depth, can be adjusted to meet the required flow of material.
Related Resources
View More
Why McLanahan Apron Feeders
McLanahan停机坪给料机是根据国家钢铁公司几十年前开发的使用履带式底盘的概念设计的. 它们的可靠性已通过数百台仍在现场运行的停机坪喂料机的测试.
McLanahan Apron Feeders are available in six chain sizes, 16种标准飞行宽度和无限长度范围-所有这些都是为了满足客户的应用要求而设计的.
McLanahan停机坪给料机使用密封的终身底盘组件, with oversized head shaft bearings, 减少监控并将维护需求保持在最低限度. Designed to provide unmatched reliability, Apron Feeder components include a lubricated chain, carry rollers, return rollers, idler wheels, 100,000 hour bearings and fabricated components. Since there are very few components used in an Apron Feeder, maintenance inventory can often be kept quite low. When maintenance is required, most tasks can take place at the tail-end of the Apron Feeder, which is easily accessible.
安全拉绳和零速度开关是标准功能. 不像其他振动给料机，当你停止一个围裙给料机，物料流动立即停止.
停机坪支线航班可以提供铸造锰或制造, formed steel to fit the duty requirements of the application. 这给了最终的灵活性，有正确的馈线职责的应用程序.
胶圈给料机驱动系统可提供机电或液压，以配合工作和应用的要求.
Frequently Asked Questions About Apron Feeders
Ask An Expert围裙给料机是为每个应用程序计算和设计的. 这确保了它们众所周知的性能和可靠性.
对胶圈给料机功率计算和设计至关重要的信息包括物料类型, feed rate, size of material and more. Please contact McLanahan 您可以填写一份问卷，以便我们帮助您选择合适的围裙喂食器.
You can also download our guide How to Size and Select a Feeder 确保您对所需的信息有适当的了解，以确保您的馈线是正确的选择，适合您的特定应用要求.
McLanahan围裙给料器上的托辊安装通道设计为可拆卸部分，允许从给料器外部更换托辊.
在麦克菠菜网最稳定正规平台_最全菠菜网大全围裙给料器上的返回辊短轴安装到支架上. 这个支架用四个紧固件安装在主梁的腹板上. The fasteners are accessible from outside the feeder. 一旦拆卸支架，就可以更换回轮.
McLanahan机坪给料机部件的平均寿命如下:
- Drive sprocket - one to four years
- Carry roller - five to seven years
- Return roller - five to 10 years
- Tail wheel - seven to 10 years
- Chain - seven to 15 years.
电气-机械和液压驱动都可在McLanahan停机坪给料机. 电-机械驱动成本更低，并且在速度范围和每小时启动/停止方面受到限制. 液压驱动更昂贵，具有无限速度范围和每小时无限启动/停止.
McLanahan experts say that a sealed chain is preferred, as it lasts longer and requires little routine checkups. If the lip seal fails on a SALT chain, failure is imminent.
McLanahan Apron Feeders offer reliability, high uptime and high returns on capital, and are designed for decades of service.
Features & Benefits
- 坚固的焊接钢梁框架与冲击轨道，以限制飞行偏转, thus eliminating permanent bending of the flight
- 头轴上的大型抗摩擦球面轴承，导致轴承寿命长
- 润滑脂润滑轴承安装在外壳和迷宫或塔克耐密封
- 拖拉机惰轮(终身密封)安装在可调尾架焊件上
- 标准底盘组件，产生可靠，长寿命馈线
- 铸造锰分段链轮螺栓连接到重型钢轮毂键到超大的前传动轴
- 优越的飞行密封重叠设计，减少细粒泄漏